Revue internationale de la traduction / International Journal of Translation
Babel is a scholarly journal designed primarily for translators, interpreters and terminologists (T&I), yet of interest also for non-specialists concerned with current issues and events in the field.
The scope of Babel is intentional and embraces a multitude of disciplines built on the following pillars: T&I theory, practice, pedagogy, technology, history, sociology, and terminology management. Another important segment of this journal includes articles on the development and evolution of the T&I professions: new disciplines, growth, recognition, Codes of Ethics, protection, and prospects.
The creation of Babel was proposed on the initiative of Pierre-François Caillé, founding president of the Fédération Internationale des Traducteurs (FIT) and approved by the first FIT Congress of 1954 in Paris. Babel continues to be published for FIT and each issue contains a section dedicated to THE LIFE OF FIT.
Articles for Babel are normally published in English or French but we also accept articles in Arabic, Chinese, German, Italian, Russian and Spanish.
Babel is published for the International Federation of Translators (FIT).
Babel publishes its articles Online First.
All prices for print + online include postage/handling.
|Online-only||Print + online|
|Volume 68 (2022): 6 issues; ca. 900 pp.||EUR 293.00||EUR 329.00|
|Volume 67 (2021): 6 issues; ca. 900 pp.||EUR 293.00||EUR 329.00|
Individuals may apply for a special subscription rate of EUR 80.00 (online‑only: EUR 75.00)
Private subscriptions are for personal use only, and must be pre-paid and ordered directly from the publisher.
|Online-only||Print + online|
(Vols. 1‒66; 1955‒2020)
|EUR 9,692.00||EUR 8,335.00|
|Volume 66 (2020)||6 issues; 900 pp.||EUR 284.00||EUR 319.00|
|Volume 65 (2019)||6 issues; 900 pp.||EUR 278.00||EUR 313.00|
|Volume 64 (2018)||6 issues; 900 pp.||EUR 270.00||EUR 304.00|
|Volume 63 (2017)||6 issues; 900 pp.||EUR 262.00||EUR 295.00|
|Volume 62 (2016)||4 issues; 600 pp.||EUR 218.00||EUR 246.00|
|Volume 61 (2015)||4 issues; 600 pp.||EUR 218.00||EUR 239.00|
|Volume 60 (2014)||4 issues; 500 pp.||EUR 218.00||EUR 232.00|
|Volume 59 (2013)||4 issues; 500 pp.||EUR 218.00||EUR 225.00|
|Volumes 57‒58 (2011‒2012)||4 issues; avg. 500 pp.||EUR 212.00 each||EUR 218.00 each|
|Volumes 43‒56 (1997‒2010)||4 issues; avg. 386 pp.||EUR 193.00 each||EUR 199.00 each|
|Volumes 25‒42 (1979‒1996)||4 issues; avg. 250 pp.||EUR 125.00 each||EUR 129.00 each|
|Volumes 19‒24 (1973‒1978)||4 issues; avg. 200 pp.||EUR 100.00 each||EUR 103.00 each|
|Volumes 2‒18 (1956‒1972)||4 issues; avg. 200 pp.||EUR 100.00 each||Not available|
|Volume 1 (1955)||1 issue; 100 pp.||EUR 50.00||Not available|
Volumes and issuesOnline-first articles
Volume 67 (2021)
Volume 66 (2020)
Volume 65 (2019)
Volume 64 (2018)
Volume 63 (2017)
Volume 62 (2016)
Volume 61 (2015)
Volume 60 (2014)
Volume 59 (2013)
Volume 58 (2012)
Volume 57 (2011)
Volume 56 (2010)
Volume 55 (2009)
Volume 54 (2008)
Volume 53 (2007)
Volume 52 (2006)
Volume 51 (2005)
Volume 50 (2004)
Volume 49 (2003)
Volume 48 (2002)
Volume 47 (2001)
Volume 46 (2000)
Volume 45 (1999)
Volume 44 (1998)
Volume 43 (1997)
Volume 42 (1996)
Volume 41 (1995)
Volume 40 (1994)
Volume 39 (1993)
Volume 38 (1992)
Volume 37 (1991)
Volume 36 (1990)
Volume 35 (1989)
Volume 34 (1988)
Volume 33 (1987)
Volume 32 (1986)
Volume 31 (1985)
Volume 30 (1984)
Volume 29 (1983)
Volume 28 (1982)
Volume 27 (1981)
Volume 26 (1980)
Volume 25 (1979)
Volume 24 (1978)
Volume 23 (1977)
Volume 22 (1976)
Volume 21 (1975)
Volume 20 (1974)
Volume 19 (1973)
Volume 18 (1972)
Volume 17 (1971)
Volume 16 (1970)
Volume 15 (1969)
Volume 14 (1968)
Volume 13 (1967)
Volume 12 (1966)
Volume 11 (1965)
Volume 10 (1964)
Volume 9 (1963)
Volume 8 (1962)
Volume 7 (1961)
Volume 6 (1960)
Volume 5 (1959)
Volume 4 (1958)
Volume 3 (1957)
Volume 2 (1956)
Volume 1 (1955)
9 June 2021
26 May 2021
21 May 2021
6 April 2021
22 December 2020
14 December 2020
9 December 2020
4 December 2020
30 November 2020
25 November 2020
23 November 2020
20 November 2020
20 October 2020
16 October 2020
9 October 2020
5 October 2020
2 October 2020
25 August 2020
17 August 2020
4 August 2020
29 July 2020
22 July 2020
21 July 2020
1 July 2020
8 June 2020
25 May 2020
20 May 2020
1 May 2020
22 April 2020
20 April 2020
17 April 2020
10 April 2020
8 April 2020
7 April 2020
6 April 2020
3 April 2020
19 March 2020
17 March 2020
19 February 2020
18 February 2020
17 February 2020
7 February 2020
31 January 2020
28 January 2020
24 January 2020
17 January 2020
10 January 2020
7 January 2020
23 December 2019
20 December 2019
18 December 2019
13 December 2019
For the benefit of production efficiency and the production of texts of the highest quality and consistency, we urge you to follow the enclosed submission guidelines.
Contributions should preferably be in English or French. If you are not a native speaker it is advisable to have your text checked by a native speaker before submission. Articles in Spanish, German or Russian will also be considered.
Spelling in papers in English should be British English or American English consistently.
Manuscripts, of not more than 9,000 words, should be submitted in duplicate.
All pages should be numbered consecutively and typed on one side only.
Submissions will not be returned; the author should keep a complete copy of the manuscript.
The first page should contain the title; the name, affiliation and address of each author; a self-contained abstracts (150-200 words) and a list of keywords in English and French. For abstracts in French, the Editors may assist upon request.
Authors are responsible for observing the laws of copyright when quoting or reproducing material. The copyright of articles published in Babel is held by the FIT.
When submitting the final manuscript please make sure that you provide the following:
- final versions of the file(s)
- identical hard copy or a PDF file with embedded fonts, showing all special characters as they should be printed.
Hard copy and electronic files
Hard copy: Please provide hard copy or a PDF file with embedded fonts. During the production process the hard copy or PDF are referenced by the typesetter and is of great help to solve problems in the files, such as conversion errors, distorted tables, lost graphs, etc.
Electronic files: Please make sure that you supply all text and graphic files of the final version of the manuscript. Please delete any personal comments so that these cannot mistakenly be typeset, and check that all files are readable.
File naming conventions: When naming your file please use a clear and consistent file naming convention. We suggest the following: use the first three characters of your own surname; if your name is Johnson, the files should be named JOH.DOC,
if further divided into chapters JOH1.DOC, JOH2.DOC. Figures can be named as follows JOH1.EPS, JOH2.EPS, etc. Please write the file names on the corresponding hard copy. This naming convention is particularly important when submitting for collective
Please write the file names down on the corresponding hard copy.
Software: Files in Word are preferred, but our typesetters can convert almost anything.
If, for some reason, a different format is required than supplied, we will contact you.
Graphic files: Please supply Figures and Plates as Encapsulated Postscript (EPS) or Tagged Image File Format (TIFF) conversion in addition to the source files. Please ensure the resolution is fit for print media, preferably 300 dpi.
Our typesetters will do the final formatting of your document. However, some of the text enhancement cannot be done automatically and therefore we kindly ask you to carefully observe the following style.
Please use a minimum of page settings. The preferred setting is 12 pt Times New Roman, double line spacing, on 13 x 22 cm (5" x 8.6") text area. With this setting the ratio manuscript to typeset pages is roughly 2:1. The only relevant codes are those pertaining to font enhancements (italics, bold, caps, small caps, etc.), punctuation, and the format of the references. Whatever formatting or style conventions you use, please be consistent.
Please do not use right-hand justification or automatic hyphenation.
Please use Unicode fonts for special characters or supply the required TrueType or PostScript Type 1 fonts with your submission. For texts including examples or fragments in Arabic, Chinese, Japanese, or Korean this is required. Otherwise, any symbols or visual aspects that you cannot produce in electronic form should be marked clearly in red on the manuscript. If a symbol occurs frequently you can use an alternative symbol (e.g. # $ %) and enclose a list of these with their correct transcription.
Tables, figures and plates
- Tables and figures should be numbered consecutively and provided with concise captions (max. 240 characters).
- All figures and tables should be referenced in the text, e.g. (see Figure 5). Please do not use relative indicators such as “see the table below”, or “in this table: ...”.
- If the table or figure is not enclosed in the text file, please indicate the preferred position of the table or figure in the text by inserting a line “ Insert (file name) here” at the appropriate position. It will be placed either at the top or the bottom of the page on which it is mentioned, or on the following page.
- The book will be printed in black & white. Please make sure any illustrations are still meaningful when printed in black & white.
- All tables, plates, and figures eventually have to fit the following text area, either portrait or landscape: 12 cm x 20 cm at 8 pt minimum.
- Notes in tables and figures should not be regular endnotes. Please use a table note or a figure note as in the example below. Standard note indicators in tables are *, **, †, ‡. The note itself is then inserted directly below the table/figure.
- In tables, keep shading to a functional minimum and for individual cells only, not for entire rows or columns.
Please do not include running heads in your article. In case of a long title, please suggest a short one for the running head (max.55 characters) on the title page of your manuscript.
Emphasis and foreign words
Use italics for foreign words, highlighting, and emphasis. Bold should be used only for highlighting within italics and for headings. Please refrain from the use of FULL CAPS (except for focal stress and abbreviations) and underlining (except for highlighting within examples, as an alternative for boldface).
Please transliterate into English any examples from languages that use a non-Latin script, using the appropriate transliteration system (ISO or LOC).
Chapters and headings
Chapters or articles should be reasonably divided into sections and, if necessary, into subsections. Please mark the hierarchy of subheadings as follows:
Heading A = bold, two lines space above and one line space below.
Heading B = italics, one line space above and one line space below.
Heading C = italics, one line space above, text on new line
Heading D = italics, one line space above; period; run on text.
Text quotations in the main text should be given in double quotation marks. Quotations longer than 3 lines should have a blank line above and below and a left indent, without quotation marks, and with the appropriate reference to the source.
Listings: Should not be indented. If numbered, please number as follows:
1. ..................... or a. .......................
2. ..................... or b. .......................
Listings that run on with the main text should be numbered in parentheses: (1).............., (2)............., etc.
Examples and glosses
Examples should be numbered with Arabic numerals (1,2,3, etc.) in parentheses.
Examples in languages other than the language in which your contribution is written should be in italics with an approximate translation. Between the original and the translation, glosses can be added. This interlinear gloss gets no punctuation and no highlighting. For the abbreviations in the interlinear gloss, CAPS or SMALL CAPS can be used, which will be converted to small caps by our typesetters in final formatting.
Please note that lines 1 and 2 are lined up through the use of spaces: it is essential that the number of elements in lines 1 and 2 match. If two words in the example correspond to one word in the gloss use a full stop to glue the two together (2a). Morphemes are seperated by hyphens (1, 2b).
Every next level in the example gets one indent/tab.
(1) Kare wa besutoseraa o takusan kaite-iru.
he TOP best-seller ACC many write-PERF
“He has written many best-sellers.’”
(2) a. Jan houdt van Marie.
Jan loves Marie
“Jan loves Marie.”
b. Ed en Floor gaan samen-wonen.
Ed and Floor go together-live.INF
“Ed and Floor are going to live together.”
Notes should be kept to a minimum. Note indicators in the text should appear at the end of sentences and follow punctuation marks.
Funding information should be provided if funding was received through a grant for the research that is discussed in the article, including funder name and grant number, in a separate section called "Funding information" before (an Acknowledgment section and) the References.
Acknowledgments (other than funding information, see above) should be added in a separate, unnumbered section entitled "Acknowledgments", placed before the References.
It is essential that the references are formatted to the specifications given in these guidelines, as these cannot be formatted automatically. This book series uses the ‘Author-Date’ style as described in the latest edition of The Chicago Manual of Style.
References in the text: These should be as precise as possible, giving page references where necessary; for example (Clahsen 1991, 252) or: as in Brown et al. (1991, 252). All references in the text should appear in the references section.
References section: References should be listed first alphabetically and then chronologically. The section should include all (and only!) references that are actually mentioned in the text.
A note on capitalization in titles. For titles in English, CMS uses headline-style capitalization. In titles and subtitles, capitalize the first and last words, and all other major words (nouns, pronouns, verbs, adjectives, adverbs, some conjunctions). Do not capitalize articles; prepositions (unless used adverbially or adjectivally, or as part of a Latin expression used adverbially or adjectivally); the conjunctions and, but, for, or, nor; to as part of an infinitive; as in any grammatical function; parts of proper names that would be lower case in normal text; the second part of a species name. For more details and examples, consult the Chicago Manual of Style. For any other languages, and English translations of titles given in square brackets, CMS uses sentence-style capitalization: capitalization as in normal prose, i.e., the first word in the title, the subtitle, and any proper names or other words normally given initial capitals in the language in question.
Görlach, Manfred. 2003. English Words Abroad. Amsterdam: John Benjamins. total number of pages.
Spear, Norman E., and Ralph R. Miller (eds). 1981. Information Processing in Animals: Memory Mechanisms. Hillsdale, NJ: Lawrence Erlbaum. total number of pages.
Article (in book):
Adams, Clare A., and Anthony Dickinson. 1981. “Actions and Habits: Variation in Associative Representation during Instrumental Learning.” In Information Processing in Animals: Memory Mechanisms, ed. by Norman E. Spear, and Ralph R. Miller, 143–186. Hillsdale, NJ: Lawrence Erlbaum.
Article (in journal):
Claes, Jeroen, and Luis A. Ortiz López. 2011. “Restricciones pragmáticas y sociales en la expresión de futuridad en el español de Puerto Rico [Pragmatic and social restrictions in the expression of the future in Puerto Rican Spanish].” Spanish in Context 8: 50–72.
Rayson, Paul, Geoffrey N. Leech, and Mary Hodges. 1997. “Social Differentiation in the Use of English Vocabulary: Some Analyses of the Conversational Component of the British National Corpus.” International Journal of Corpus Linguistics 2 (1): 120–132.
Appendixes should follow the References section.
Additional Style Guidance
Please use in-text citations, numbered endnotes, and works cited.
1. Please do not justify the right margin of your manuscript or the electronic version on disk. Leave a ragged right margin.
2. Please double space everything, including quotations and footnotes.
3. Please use American spellings and punctuation, including
- spellings in -ize, -or, etc.
- punctuation that includes a comma before and or or in a series of 3 items (e.g. lexis, morphology, and syntax)
- commas to set off any preceding dependent clause of a complex sentence or to divide a compound sentence
- double quotes to enclose a quotation and single quotes to indicate a quote within a quote;
- end quotes after punctuation (i.e., “to be done.”)
- comma after i.e. and e.g.
- do not punctuate lists
4. Section headers, if used, should simply be phrases with no numbers. Please restrict headers to three or four per essay. They may be italicized.
- indicate a new paragraph with a single tab
- set off any introductory phrase of five words or more with a comma, e.g. “Toward the end of World War II,...”
- dates should be of the form “15 December 1998”
- decades should be of the form “the 1980s”
- spell out centuries, e.g., “eighteenth century”
- at first mention of an author in your text, provide the full name, e.g., “Anne Ross...”; all following in-text references should use only the last name
- use “and” in place of “&”, and “see” in place of “cf.”
- use minimal capitalization, e.g., “translation studies”, “the Roman Catholic church”;
- use minimal hyphenization, e.g., “postcolonial”
- possessives of names ending in “s” should take the form of “Yeats's”
- please avoid inappropriately gendered language, finding locutions as well that avoid awkward forms like “his/her” whenever possible.
- represent dashes as two hyphens, no spaces, e.g., “despite the difficulty--however great.”
Author’s Submission Checklist
When submitting the revised version of your accepted manuscript, in addition to following the guidelines above, please be sure that you also include:
- a one-paragraph abstract of your article in French and English
- a list of approximately five keywords (French and English) to aid in searching and indexing
- a short (2-3 sentence) professional profile, including key publications
- full contact details
The first author of a contribution will receive a PDF of first proofs of the article for correction via email and will be requested to return the corrections to the journal editors within 7 days of receipt. Acrobat Reader can be downloaded for free from www.adobe.com which will enable you to read and print the file. Please limit corrections to the essential. It is at the publisher’s discretion not to implement substantial textual changes or to charge the author. If it is absolutely necessary to change larger chunks of text (i.e. more than just a few words), it is best to submit the changes elcetronically (with identical hard copy).
Please contact the journal editors if you cannot handle proofs for your article in electronic format (i.e., receive the proofs as a PDF-attachment at your email address, print them out, and return your corrections marked on the paper printout).
Electronic copies of manuscripts, books for review and editorial correspondence can be sent to the two Editors-in-Chief:
Prof. Dr. Yifeng SUN at sunyfum.edu.mo and Prof. Dr. Audrey LOUCKX at audrey.louckxumons.ac.be